Sink Base Cabinet – GREY SHAKER

None of our cabinets are made of particle board.

No, the doors are not reversible.

All of our cabinets lines are more than strong enough to hold granite or concrete.

All of the cabinets are finished inside, but not all of them are the same as the face frame. It would depend on the style of cabinet that you are looking at.

All of our medicine cabinets are built in.

Yes, the sides of the cabinets are finished to match the face frames and doors.

All of the cabinet ends are finished, but if you want to bring the sides flush with the face frame, you will have to use end panels.

Some people do, but most people don’t. It is really simple to assemble them and doesn’t require any experience.

Wood glue is not required to assemble the cabinets, but it also wouldn’t hurt if you added some. We leave that up to the customer

All of the cabinets and vanities come with a piece of toe kick, but most people like to create a uniform look across the front to hide the seams where the cabinets connect. For that, you will need to buy additional toe kick.

The manufacturing process has been improved to make sure that our cabinets are as eco-friendly as possible. All of the cabinet lines pass the new emissions standards that have been set by California, which are toughest in the country.

Yes, all of our cabinets meet the new California Emissions regulations.

We do not carry end panels for the pantries, since the sides are finished to match the face frames and doors. You could use decorative false doors on the sides if you wanted to add some detailing to it.

All of the styles and finishes we manufacture are listed on the website.

No, we do not. One option for creating a shallow pantry is to stack wall cabinets on top of each other.

Yes, we offer a 1 year limited warranty on the cabinets.

No, we do not sell any knobs and pulls for the cabinets.

All kitchen base cabinets are going to be a standard depth of 24″. All vanity base cabinets are going to be a standard depth of 21”.

All wall cabinets are the standard depth of 12″, unless otherwise stated.

Everyone from the novice DIY’er to the experienced contractor can assemble them. If you have a screw driver, that is all you are going to need.

Vanity heights are going to be a standard height of 34 1/2″ tall.

All of our base cabinets are 34.5″ high (standard height). This allows for a 1.5″ top to make 36″

Industry standard is a minimum of 19″.

For most of the cabinet lines the blind base needs to be installed 3”-6″ away from the wall and will also have a maximum pull. Please review the specific cabinet specifications to be sure you are accounting for the correct amount of space.

No, you do not have to buy toe kick unless you want to create a uniform look across the bottom of the cabinets.

Dovetailing is a method of assembly. Some of our cabinet lines come with dovetailed drawers. Traditionally, dovetailing will offer a stronger bond.

RTA Cabinets are the alternative to high priced, custom and semi-custom kitchen cabinets. They give both homeowners and professionals an affordable way to get a high quality cabinet at an affordable price.

You could always move the plumbing, but that would most likely require a professional plumber. If you won’t want to hire someone, you can either create a false drawer where the plumbing is interfering by not using the actual drawer box

The plywood that is used is furniture grade plywood.

A decorative false door is a cabinet door that is sized to fit the sides of the cabinets, and to create a custom look on the sides.

A dishwasher end panel is used where the dishwasher is going to come at the end of a run of cabinets. It helps to finish off the end, and trim out the dishwasher.

A refrigerator panel is used for the sides of a refrigerator to box it in and create a custom, built in look.

The medicine cabinets are all 6″ deep.

Full overlay doesn’t leave any of the face frame exposed.

There are different types of camlocks, but a camlock is simply an open ended wheel that locks onto a peg or some other mounting device. By turning it like a screw, you create a tight bond.

The majority of our cabinets are made from Maple that is harvested out of China and Russia.

The cabinets are all manufactured in China.

There are several factors that lead to the lower price, but it really comes down to eliminating the middle men and giving you a high quality product without the cost of a brand name. Lower overhead, factory direct pricing.

While we would like to offer as many different filler sizes as possible, the 3″ and 6″ can be cut down to fill any gap that may be needed to be filled. Anything over 6″ should be added to the cabinet next to it, or bump up the 9″ cabinet.

No. All of our kitchen and vanity cabinets are not sold with hardware.